+7 (473) 200-00-10

RU EN

Mould powders produced by EuroTechMet company

Link to the site of mould powder production: http://intocast-rus.ru/.


The joint German-Russian enterprise "IntocastRus" produces granulated fluxes Alsiflux for CCM mould. Wide production assortment allows to choose a mould powder with the required consumer performance for different speeds of casting of a continuous cast billet of any section of the entire range of steel cast on CCM.2016-04-28_12-42-23.png

 

Technical specialists of “EuroTechMet” and “Intocast Rus” companies individually select every mould powder, based on the production conditions of a particular enterprise.

 

Many metallurgical enterprises in Russia and CIS countries conducted alternative trials of proposed granulated products, according to the results of which the company provides the industrial supply of mould powder in large quantities.

 

The application parameters, indicated in the table below, for each mould powder are of advisory nature and specified individually for the consumer's conditions.

Mould powder mark Billet type Carbon content range in steel, % Steel grades Casting speed
GS 813/P-6 slab 0,08-0,24 - 0,60-1,20
GS LC 6.1
slab
0,01-0,07 - 0,60-1,30
GS 512/L2
slab
0,02-0,25 - 0,50-1,10
GS-C7
slab
0,01-0,08 - 0,70-1,70
GBB 713/M beam 0,03-0,20 - -
GBB 713/M4
beam 0,03-0,20
- -
GS 915/L
slab
0,01-0,08 - 0,80-1,60
GS 1015/P
slab
0,08-0,17 - 1,00-1,60
GS 1222/P
slab
0,15-0,23 - 1,00-2,20
GB 535/P
billet 0,08-0,20 - 0,50-3,50
GB 1640/M
billet
0,07-0,45 - 1,60-4,00
GB 1030/H
billet
>0,40 - 1,00-3,00
GB 1022/M
billet, round billet
0,05-0,40 - -
GB 1032/AF2
billet
- stainless steel 0,60-3,00
GB-C6
billet
<0.08, >0.40 - 0,40-3,00
GR 1035/L
round billet 0,01-0,08 -    1,00-3,50
GR 1030/P
round billet 0,08-0,17 - 1,00-3,00
GB 618/R
billet, rail
- - 0,50-1,80
GS 1217/P
slab 0,08-0,17
- 1,20-1,70
GB MC-5
billet 0,10-0,40 alloyed and non-alloy steel
0,50-1,20
GS 1018/U2
slab >0.01 IF steel 0,80-1,80
GS MC22MA
slab
0,08-0.18
- 1.00-1.80
GS 813/P
slab
0,08-0.17
- 0.60-1.30
GS 613/P-LK
slab
0,08-0.17
- 0.60-1.10
GS 1015/H
slab
<0.23
- 1.00-1.50   
GS 1218/L
slab
0.01-0.07
- 1.20-1.80
GTS 4060/L-9
thin slab 0.01-0.065
- 2.00-5.00
GTS 4060/M1
thin slab 0,16-0,23
- 2.00-5.00
GB 1035/LP2
billet 0,10-0,50
- -
GS-ULC2.12M
slab
<0.05
- 0.70-1.30
GS 1020/P
slab
0.08-0.17 - 0.80-2.00
GS 713/U-1
slab
<0.01
IF steel
0.50-1.40
GS 1019/P
slab
0.08-0.17
- 0.80-2.00
GS 1017/L
slab
0.01-0.07 - 0.80-2.00
GS 1222/P-1
slab
0.15-0.23
- 1,00-2,20
GBB 713/M5 beam 0.03-0.20 - -
GB 1034/P
billet, round billet -
- -
GB 1035/LP4
billet 0.10-0.50 - -
GB 1038/P
billet, round billet
-
- -
GS 612/LF slab 0.01-0.07
- -   
GR 520/MH round billet >0.08
- 0,30-2,00
GS 812/U1
slab
<0.01
IF steel
0.80-1.30
GS 512/TR
slab
- Transformer steel
0.50-1.30
GS 512/U
slab
<0.01
IF steel
0.50-1.30
GS 515/D
slab
- Dynamo steel 0.50-1.30